Ore Sizer VSI Crushers Operating Spec.
|
Specification
|
OM50
|
OM80
|
OM100
|
|
Overall Dimension |
|
|
|
| Length |
4.5 m |
4.5 m |
4.5 m |
| Width |
2.0 m |
2.45 m |
3.0 m |
| Height |
2.0 m |
2.0 m |
3.0 m |
| Height with Legs |
3.0m - 5.0 m |
3.0 - 5.0 m |
3.0 - 5.0 m |
|
Weights |
|
|
|
| Crusher without motors |
10.5 tonnes |
11.5 tonnes |
13.75 tonnes |
| Crusher - twin drive |
n/a |
12.25 tonnes |
14.25 tonnes |
|
Rotors (fully dressed) |
|
|
|
| 29" 3-port |
380 kg |
380 kg |
na |
| 35" 3-port |
532 kg |
532 kg |
532 kg |
| 40" 3-port |
na |
550 kg |
550 kg |
| 29" 5-port |
420 kg |
420 kg |
na |
| 35" 5-port |
na |
653 kg |
653 kg |
| 35" 6-port |
na |
665 kg |
665 kg |
| 40" 6-port |
na |
na |
686 kg |
|
Rotor Speeds |
|
|
|
| 29" 3-port |
1400-2200 rpm |
1400-2200 rpm |
na |
| 35" & 40" 3-port |
1300-1800 rpm |
1300-1800 rpm |
1300-1800 rpm |
| 29" 5-port |
1200-2200 rpm |
1200-2200 rpm |
na |
| 35" 5-port |
na |
1200-1700 rpm |
1200-1700 rpm |
| 35" & 40" 6-port |
1000-1700 rpm |
1000-1700 rpm |
1000-1700 rpm |
|
Crusher Production |
|
|
|
| Feed size (max true measurement) |
up to 40 mm |
up to 65 mm |
up to 75 mm |
| * Throughput - tonnes per hour |
min 30 max 65 |
min 60 max 200 |
min 60 max 350+ |
| * Typical production (assuming closed circuit) |
30-65 tonnes/hr |
60-200 tonnes/hr |
30-300 tonnes/hr |
| * Throughput and production rates are dependent upon
feed size, rotor type and product required. Typical single
pass production i.e. type 1 / type 2 sub-base is as per
throughput capacity. Closed circuit figures are for typical
feed -60mm, +20mm, with all product -20mm. Greater ratios of
production i.e. -60mm feed to produce -10mm, -5mm will
result in higher recalculating loads and lower production
rates, albeit these tonnages will be comparatively high
compared to competitive machines |
|
|
Wear Costs and Characteristics
|
Typical figures for wear costs in total are given below.
More accurate costing can be obtained from your dealer or
direct from Ore Sizer (UK) Ltd |
Type
|
Silica Content
|
Feed
|
Product
|
Cost per tonne
|
| Granite |
35-45% |
-60 +20mm |
-20mm |
4p |
| Basalt |
65% |
-60 +20mm |
-20mm |
5p |
| Quartzite Gravel |
98% |
-75mm +20 |
-5mm sand |
24p |
| Flint Gravel |
96/98% |
-80 +20mm |
-20mm |
14p |
| Pea Gravel |
65% |
-20 +10mm |
-3.35mm |
5p |
Description
|
Data
|
| Machine Weight OM 50 |
11.5 tonnes |
| Machine Weight OM 100 |
13.5 tonnes |
| Self Weight Structure |
2.0 tonnes |
| Sub total. |
27.0 tonnes (max for OM 100 and used for OM 50) |
| Allow for Dynamic effect |
2.7 |
| Total Load. |
29.7 tonnes. |
| No of Support Legs. |
4 |
| Load per Leg (Max) |
7.4 |
| Allow for eccentric loading. |
4.05 |
| Max total for each Leg. |
11.5 Tonnes |
|